MDM Trouble Report for 2010 Feb 17

Telescope: 2.4m
Observer(s): Capellupo (U of Florida)
Instrument: CCDS

Problem(s) Encountered:
While slewing to my first target, the dome did not stop moving
and the Dome Azimuth readout on the TCS display was not changing.
I turned off  Auto Dome  and tried resetting the Dome Azimuth
Encoder. I put  Auto Dome  back on and it worked for the next slew.
However, the next time the dome moved, it again kept moving and
the Dome Azimuth readout didn't change. I tried pressing the
yellow  Auto  button on the Dome Controller and manually returned
the dome to home. I set the Encoder to 320. I then put  Auto Dome 
back on, but the TCS Dome Azimuth readout still did not update
when the dome moved. It continued to read 320. I ended up moving
the dome manually throughout the remainder of the night.

------------------------------

Submitted on 2010 Feb 18 [5:42:50]