MDM Trouble Report for 2018 Nov 15

Telescope: 1.3m
Observer(s): John Thorstensen (Dartmouth)
Instrument: Andor direct

Problem(s) Encountered:
When I was going to close at the end and issued the 
point command, the move halted partway through with a 
slew not converging error (tracking had been turned off so
that wasn't the problem).   I didn't check the position of 
the telescope by hand, but position readout indicated HA=0 and a dec
of about 45.  Repeating the command put the telescope
in the zenith.

The command I was using was 

point ha=0 dec=31:57:12 nodome 

as usual.

------------------------------

Submitted on 2018 Nov 16 [6:34:56]