Guider Focus Failure

Monday, January 14, 2019 3:01 PM

Problem(s) Encountered:

When I started I found I couldn't focus the guider -- the lights on the virtual control panel lit, but the stars did not change. Consulted Eric by phone and determined that I couldn't fix it by myself.  It didn't matter to much since MAXIM DL could still guide on the out-of-focus images.


Found the USB port on the TCS machine had stopped (PCI bus 1, device 0, function 0) due to reported problems (code 43).Reboot the PC and all is well again.