Rotator motion failure

Friday, October 2, 2026 6:54 AM

Problem(s) Encountered:

Fairly early in the night I rotated the instrument to minus-75 degrees, and left it there until the end of the night. When I went to rotate it back (for the last target) it would not move -- when I push the button, I hear the relay clack, but I don't hear the motor coming on. I was unable to resolve this.  
Also, the power failed at 2:10 or so, and the generator is running. In case it matters, I had rotated the instrument before the power failed.

Solution:

Confirmed the relay clack but no motion, either from the Rotator GUI or the physical hand paddle.  Power cycled the electronics for the rotator, resolving the issue.