TCS cycling and telescope focus

Friday, October 23, 2026 7:15 AM

Problem(s) Encountered:

Multiple issues at both telescopes held my attention. Eric helped me fix the haywire TCS at the 2.4m that was throwing socket connection codes, and when I came back to observe I got on a target, found a guide star which was a giant donut, and was unable to focus this donut. I was able to move the focus in and out and watch it change but never far enough to focus. My guess is there is some guide probe mechanical failure (I.E. not continuing to move to it's limit)? not really sure, and also seems very unlikely all of these issues would occur all on one night. Had to close up without making observations for I think the first time trouble related since I have been at MDM. Frustrating night. I did help Kishalay fix the pointing on the 1.3m which made me feel better at least one of us got data tonight.

Solution:

I suspect after the power cycling that the telescope focus is way off.  During software/hardware cycling, the focus typically changes, sometimes significantly.  Checking the TCS this morning, I see it indicating a value roughly 2,000 counts lower than typical for OSMOS (or roughly a deviation of 45%).  This would certainly explain a guider that couldn’t be focused.